Wednesday, January 1, 2020

SINGLE PHASE WIRING : ETE 1024



MINISTRY OF EDUCATION, MALAYSIA

VOCATIONAL COLLEGE STANDARD CURRICULUM

COURSE INFORMATION



PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024
LEVEL / SEMESTER
:
2 SEMESTER 1
CREDIT UNIT
:
4.0
CONTACT HOUR
:
FACE TO FACE
:
8.0 HOURS / WEEK


NON FACE TO FACE
:

COURSE TYPE
:
VOCATIONAL
PREREQUISITE
:
-
CORE REQUISITE
:




COURSE OUTCOMES  (COMPETENCY UNIT WORK ACTIVITIES)

At the end of the course, the students should be able to:-

  1. Identify single phase wiring specifications and procedures, tools, equipment and materials.
  2. Carry out wiring activities.
  3. Carry out single phase earthing system installation, Distribution Board (DB) (metallic  or insulated) installation.
  4. Carry out fitting, accessories installation and system visual inspection.
  5. Carry out dead and live circuit test.





COURSE DESCRIPTION  (COMPETENCY UNIT DESCRIPTOR)

Single phase wiring covering the scope of competency to carry out wiring activities for Single Phase based on drawing given by utilizing wiring tools, equipment and materials in compliance with Electrical Act 1990, Electrical Regulation 1994 and other related rules and regulations body and statutory requirements. The personnel who are competent in the single phase electrical wiring must be able to interpret single phase wiring specifications and procedures, single phase wiring requirement, carry out wiring activities, earthing system installation and carry out continuity, polarity, insulation and resistance testing on the single phase wiring system.














CONTENT AND LEARNING STANDARDS


PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024



CONTACT HOURS
(TRAINING DURATION)

CONTENT STANDARD
(WORK ACTIVITIES)

LEARNING STANDARD
(RELATED KNOWLEDGE / APPLIED SKILLS
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA

16 HOURS
(2 WEEKS)

THEORY : 
     4 HOURS
PRACTICAL : 
           12 HOURS

  1. IDENTIFY SINGLE PHASE WIRING SPECIFICATIONS AND PROCEDURES


RELATED KNOWLEDGE

    1. Procedure of site visit and evaluation / survey.

    1. Technique to produce layout drawing.

    1. Various type of conductor: Copper and Aluminum

    1. Various types of cable: XLPE/SCT/PVC, PVC/PVC, PVC/SWA/PVC and XLPE/SWA/PVC.

    1. Cable colour coding according to MS IEC 60364 Standard.



    1. Various types of protection devices: MCB, MCCB, RCCB/ELCB and Fuse.

    1. Types of single phase wiring: Surface wiring, Conceal wiring, Conduit wiring, Conceal conduit Wiring, Ducting wiring, Trunking / Casing, Cable tray and Underground.

    1. Suitable fitting and accessories: Switches and Power Point (S/S/ 13A).

    1. Electrical Act & Regulation and Standard: Energy Commission Act 2001, Electricity Supply Act 1990 (Act 447), Electrical Regulation 1994, MS 1936: 2006 / IEC 60364, MS 1979: 2007 (COP), Electrical Installation of Buildings – Code of practice (COP) and Based on latest instruction by regulatory body.

    1. Occupational Safety & Health Act 514 (OSHA) 1994.

    1. Authorization requirement to access site such as: Green card and Safety passport.









RELATED SKILLS

    1. Determine procedure to carry out site visit and evaluation.

    1. Determine location of the wiring route.

    1. Determine types of wiring.

    1. Determine types of protection devices.

    1. Determine types of conductor.

    1. Determine types of cable.

    1. Determine suitable fitting and accessories.

    1. Determine authorization requirement to access site.

ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

    1. Meticulous.
    2. Housekeeping

Safety

    1. Use appropriate PPE during carry out wiring practical.
    2. Safety tools & equipment in proper order.


ASSESSMENT CRITERIA

    1. Correct wiring route and inspection fitting and accessories according to Electrical Act & Regulation and Standard / Occupational Safety & Health Act 514 (OSHA) 1994.

    1. Determine correct polarity and connection according to Electrical Act & Regulation / Occupational Safety & Health Act 514 (OSHA) 1994. 








































CONTENT AND LEARNING STANDARDS


PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024



CONTACT HOURS
(TRAINING DURATION)

CONTENT STANDARD
(WORK ACTIVITIES)

LEARNING STANDARD
(RELATED KNOWLEDGE / APPLIED SKILLS
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA

8 HOURS
(1 WEEKS)

THEORY : 
     2 HOURS
PRACTICAL : 
             6 HOURS

  1. IDENTIFY SINGLE PHASE WIRING TOOLS, EQUIPMENT AND MATERIALS


RELATED KNOWLEDGE

    1. Single phase Wiring procedure.

    1. Single phase Wiring preparation.

    1. Single phase Wiring inspection.

    1. Wiring tools, equipment and materials.









RELATED SKILLS

    1. Acquire single phase wiring works.

    1. Select & use single phase wiring tools equipment needed.


    1. Select & fix electrical accessories.

    1. Select & fix electrical fittings.

    1. Select wiring tools, equipment and materials.


ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

    1. Handle wiring tools with care.

Safety

    1. Ensure wiring tools in good working condition.








ASSESSMENT CRITERIA

    1. Use correct various type of tools according to Electrical Act & Regulation and Standard / Occupational Safety & Health Act 514 (OSHA) 1994.


    1. Use correct devices cable according to Electrical Act & Regulation and Standard / Occupational Safety & Health Act 514 (OSHA) 1994.




CONTENT AND LEARNING STANDARDS


PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024



CONTACT HOURS
(TRAINING DURATION)

CONTENT STANDARD
(WORK ACTIVITIES)

LEARNING STANDARD
(RELATED KNOWLEDGE / APPLIED SKILLS
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA

24 HOURS
(3 WEEKS)

THEORY : 
     6 HOURS
PRACTICAL : 
           18 HOURS

  1. CARRY OUT WIRING ACTIVITIES


RELATED KNOWLEDGE

    1. Electrical hand tools.

    1. Types of electrical equipment & materials.

    1. Single phase wiring Standard Operating Procedure.

    1. Cable marking technique.

    1. Types of cable size and polarity.







RELATED SKILLS

    1. Setup safe working area.


    1. Conduct single phase wiring according layout plan and location wiring line.

    1. Identify cable marking.

    1. Identify cable size & polarity.

    1. Check all fitting & accessories connected to earthing.


ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

    1. Ensure no wastage of cable.

Safety

    1. Use appropriate PPE during wiring activities.
    2. Ensure safety tools & equipment in proper order.





ASSESSMENT CRITERIA

    1. Conduct wiring activities according to Standard Operating Procedure.

    1. Identify installation and connection wiring according to Standard Operating Procedure. 

    1. Connect all the earthing cable to frame earthing correctly.








CONTENT AND LEARNING STANDARDS


PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024



CONTACT HOURS
(TRAINING DURATION)

CONTENT STANDARD
(WORK ACTIVITIES)

LEARNING STANDARD
(RELATED KNOWLEDGE / APPLIED SKILLS
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA

24 HOURS
(3 WEEKS)

THEORY : 
     6 HOURS
PRACTICAL : 
           18 HOURS

  1. CARRY OUT SINGLE PHASE EARTHING SYSTEM INSTALLATION


RELATED KNOWLEDGE

    1. Types of earthing.

    1. Function of earthing.

    1. Earthing procedure.

    1. Electrical symbol.

    1. Building structure.

    1. Electrical hand tools.

    1. Electrical equipment & materials.

    1. Electrical earthing accessories & fitting.


    1. Earthing layout.


RELATED SKILLS

    1. Determine types of earting.

    1. Determine function of earthing.

    1. Install Distribution Fuse Board (DFB) consumer unit to earth rod.

    1. Connect main frame electrical equipment to earth.

    1. Test earthing system.

    1. Construct earthing layout.


ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

    1. Ensure no wastage of cable.

Safety

    1. Use appropriate PPE during wiring activities.
    2. Ensure safety tools & equipment in proper order.

ASSESSMENT CRITERIA

    1. Conduct single phase earthing system according Standard Operating Procedure.

    1. Test earthing system according Standard Operating Procedure.















CONTENT AND LEARNING STANDARDS


PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024



CONTACT HOURS
(TRAINING DURATION)

CONTENT STANDARD
(WORK ACTIVITIES)

LEARNING STANDARD
(RELATED KNOWLEDGE / APPLIED SKILLS
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA

24 HOURS
(3 WEEKS)

THEORY : 
     6 HOURS
PRACTICAL : 
           18 HOURS

  1. CARRY OUT SINGLE PHASE DISTRIBUTION BOARD (DB)(METALLIC  OR INSULATED) INSTALLATION


RELATED KNOWLEDGE

    1. Distribution Board (metallic or insulated).

    1. Tools and equipment for single phase Distribution Board (metallic or insulated) installation.

    1. Wiring drawing.

    1. Standard Operating Procedures (SOP) for testing instrument.

    1. Types of electrical system testing, such as: Insulation resistance test, Polarity test and Continuity test.



RELATED SKILLS

    1. Select and use correct wiring materials.

    1. Select and use wiring tools and equipment needed.

    1. Carry out various method of consumer surface single phase wiring: Domestic surface wiring, Concealed wiring, Conduit wiring and Trunking wiring.

    1. Carry out wiring work according to wiring drawing.

    1. Execute electrical testing on wiring system.


ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

    1. Housekeeping working area after wiring activities.

Safety

    1. Use appropriate PPE during carry out earthing works.
    2. Safety tools & equipment in proper order.



ASSESSMENT CRITERIA

    1. Check neatness of wiring according Standard Operating System.

    1. Terminate cable consumer unit according Standard Operating System.

    1. Terminate cable to fitting and accessories according Standard Operating System.

    1. Test of continuity, polarity and  insulation resistance test according Standard Operating System.


CONTENT AND LEARNING STANDARDS


PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024



CONTACT HOURS
(TRAINING DURATION)

CONTENT STANDARD
(WORK ACTIVITIES)

LEARNING STANDARD
(RELATED KNOWLEDGE / APPLIED SKILLS
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA

24 HOURS
(3 WEEKS)

THEORY : 
     6 HOURS
PRACTICAL : 
           18 HOURS

  1. CARRY OUT FITTING AND ACCESSORIES INSTALLATION


RELATED KNOWLEDGE

    1. Single phase wiring drawing.

    1. Types of electrical accessories.

    1. Types of electrical fittings.

    1. Procedure to terminate cables, accessories and fittings.


RELATED SKILLS

    1. Determine location for fitting and accessories installation.



    1. Select and fix electrical accessories.

    1. Select and fix electrical fittings.

    1. Terminate cables, accessories and fittings.


ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

    1. Housekeeping working area after wiring activities.

Safety

    1. Use appropriate PPE during carry out installation works.
    2. Ensure safety tools & equipment in proper order.













ASSESSMENT CRITERIA

    1.   Terminate cable to fitting and
  accessories according standard
  operating procedure.











CONTENT AND LEARNING STANDARDS

PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024


CONTACT HOURS
(TRAINING DURATION)

CONTENT STANDARD
(WORK ACTIVITIES)

LEARNING STANDARD
(RELATED KNOWLEDGE / APPLIED SKILLS
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA

8 HOURS
(1 WEEKS)

THEORY : 
     2 HOURS
PRACTICAL : 
           6 HOURS

  1. CARRY OUT WIRING SYSTEM VISUAL INSPECTION

( 8 HOURS )

RELATED KNOWLEDGE

    1. Visual inspection.
    2. Wiring drawing according to SOP.
    3. Wiring connection.


RELATED SKILLS

    1. Execute visual inspection on wiring system.
    2. Identify fault on visual inspection.
    3. Carry out housekeeping activities.

ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

    1. Housekeeping working area after wiring activities.

ASSESSMENT CRITERIA

    1. Conduct visual inspection according standard operating procedure.

    1. Identify fault according standard operating procedure.

CONTENT AND LEARNING STANDARDS


PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024



CONTACT HOURS
(TRAINING DURATION)

CONTENT STANDARD
(WORK ACTIVITIES)

LEARNING STANDARD
(RELATED KNOWLEDGE / APPLIED SKILLS
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA

16 HOURS 
(2 WEEKS)

THEORY : 
     4 HOURS
PRACTICAL : 
           12 HOURS

  1. CARRY OUT DEAD CIRCUIT TEST


RELATED KNOWLEDGE

    1. Types of circuit/connection.

    1. Electrical testing: Insulation resistance test (IRT), Polarity test, Earthing continuity test and Earthing test (Earth resistance test and Earth loop impedance test).

    1. Testing instrument standard operating procedures (SOP).

    1. Procedure to interpret testing result.






RELATED SKILLS

    1. Determine circuit/connection.

    1. Execute electrical testing on wiring system.

    1. Interpret testing result.


ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

    1. Handle testing equipment with care.



















ASSESSMENT CRITERIA

    1. Test of continuity, polarity, insulation resistance and earthing test according standard operating procedure.














CONTENT AND LEARNING STANDARDS


PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024



CONTACT HOURS
(TRAINING DURATION)

CONTENT STANDARD
(WORK ACTIVITIES)

LEARNING STANDARD
(RELATED KNOWLEDGE / APPLIED SKILLS
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA

8 HOURS
(1 WEEKS)

THEORY : 
     2 HOURS
PRACTICAL : 
             6 HOURS

  1. CARRY OUT LIVE CIRCUIT TEST

( 8 HOURS )

RELATED KNOWLEDGE

    1. ELCB/RCB functioning testing.
    2. Supply voltage test.

RELATED SKILLS

    1. Determine ELCB/RCB functioning testing.
    2. Test supply voltage.


ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

    1. Handle testing equipment with care.

ASSESSMENT CRITERIA

    1. Determine ELCB/RCB functioning testing according standard operating procedure. 

    1. Test supply voltage according standard operating procedure.


CONTENT AND LEARNING STANDARDS


PROGRAMME
:
ELECTRICAL TECHNOLOGY
COURSE NAME
:
SINGLE PHASE WIRING
CODE NAME
:
ETE 1024



CONTACT HOURS
(TRAINING DURATION)

CONTENT STANDARD
(WORK ACTIVITIES)

LEARNING STANDARD
(RELATED KNOWLEDGE / APPLIED SKILLS
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA

8 HOURS
(1 WEEKS)

THEORY : 
     2 HOURS
PRACTICAL : 
            6 HOURS

  1. PREPARE SINGLE PHASE WORK ACTIVITIES REPORT


RELATED KNOWLEDGE

    1. Procedure to produce single phase wiring.

    1. Procedure to submit single phase wiring for approval.

    1. As built drawing preparation.

    1. Test result.

    1. Regulatory bodies and tender requirements (Form G and Form H).






RELATED SKILLS

    1. Determine procedure to produce single phase wiring.


    1. Determine procedure to submit single phase wiring for approval to superior.

    1. Prepare as built drawing.

    1. Check test result.

    1. Follow regulatory bodies and tender requirements.



ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

    1. Meticulous in writing report.










ASSESSMENT CRITERIA

    1. Submit procedure to produce
      single phase wiring according
      standard operating procedure.

    1. Report procedure of single 
     phase wiring according 
     standard operating procedure.











CORE ABILITY

CORE ABILITY 

SILA RUJUK LAMPIRAN A : JADUAL PEMETAAN NOSS DAN KSKV

SILA RUJUK LAMPIRAN B : JADUAL PEMETAAN NOSS DAN CORE ABILITY 


























TOOLS, EQUIPMENT AND MATERIALS (TEM)


ITEMS
RATIO (TEM : TRAINEES)

  1. Schematic diagram 
  2. Block Diagram 
  3. Measuring and Test Instruments 
  4. Components/Parts Specification 
  5. Distribution Boards
  6. Trunking Tools
  7. Equipment Data Book
  8. Electrical Equipment
  9. Electrical hand tools
  10. Electrical power tools
  11. Electrical Mechanical tools
  12. Electrical Accessories
  13. Electrical Fittings
  14. Electrical Testing Instrument
  15. Double Insulated cable
  16. Wiring lead
  17. Wiring nail
  18. Cables
  19. PVC Tape
  20. Standard Operating Procedure

1 : 1
1 : 1
1 : 1
1 : 1
1 : 2
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1
1 : 1





REFERENCES

  1. Undang-Undang Malaysia. (2005). Akta Bekalan Elektrik 1990 dan Peraturan-Peraturan Elektrik 1994, Pindaan sehingga 2005. MDC Publisher Sdn Bhd Malaysia. 

  1. Suruhanjaya Tenaga Malaysia. Standard Pendawaian Malaysia (Electrical Installations Of Buildings - MS IEC 60364) Jabatan Standard Malaysia 

  1. The Institution of Electrical Engineers. (1998). Peraturan-Peraturan bagi Pemasangan Elektrik, Edisi 16. Golden Books Centre Sdn Bhd 

  1. Giesecke, F. E. et. Al. 2002. Technical Drawing. Prentice Hall 

  1. BS 7671: 2001 Requirements for Electrical Installations (IEE Wiring Regulations, Sixteenth Edition) Institution of Electrical Engineers


Posted by at No comments:
Subscribe to: Posts (Atom)