KSKV ETE 1013 LUKISAN ELEKTRIK SATU FASA
MINISTRY OF EDUCATION, MALAYSIA
VOCATIONAL COLLEGE STANDARD CURRICULUM
COURSE INFORMATION
PROGRAMME | : | ELECTRICAL TECHNOLOGY |
COURSE NAME | : | SINGLE PHASE DRAWING |
CODE NAME | : | ETE 1013 |
LEVEL / SEMESTER | : | 2 SEMESTER 1 |
CREDIT UNIT | : | 3.0 |
CONTACT HOUR | : | FACE TO FACE | : | 5.0 HOURS / WEEK |
|
| NON FACE TO FACE | : |
|
COURSE TYPE | : | VOCATIONAL |
PREREQUISITE | : | - |
CORE REQUISITE | : | - |
COURSE OUTCOMES (COMPETENCY UNIT WORK ACTIVITIES)
At the end of the course, students should be able to:-
Identify single phase drawing specifications and requirement.
Carry out layout drawing.
Carry out single line / schematic diagram drawing.
Carry out single phase wiring drawing.
Inspect single phase drawing.
COURSE DESCRIPTION (COMPETENCY UNIT DESCRIPTOR)
Single phase drawing is covering the scope of competency to carry out wiring activities for Single Phase based on drawing given by utilizing wiring tools, equipment and materials in compliance with Electrical Act 1990, Electrical Regulation 1994 and other related rules and regulations body and statutory requirements. The personnel who are competent in the single phase electrical drawing must be able to identify drawing specification for single phase wiring and carry out drawing according to standard requirements.
CONTENT AND LEARNING STANDARDS
PROGRAMME | : | ELECTRICAL TECHNOLOGY |
COURSE NAME | : | SINGLE PHASE DRAWING |
CODE NAME | : | ETE 1013 |
CONTACT HOURS (TRAINING DURATION) |
CONTENT STANDARD (WORK ACTIVITIES)
|
LEARNING STANDARD (RELATED KNOWLEDGE / APPLIED SKILLS / ATTITUDE / SAFETY / ENVIRONMENTAL)
|
PERFORMANCE CRITERIA / ASSESSMENT CRITERIA
|
20 HOURS (4 WEEKS)
THEORY : 8 HOURS PRACTICAL : 12 HOURS
|
IDENTIFY SINGLE PHASE DRAWING SPECIFICATIONS AND REQUIREMENT
|
RELATED KNOWLEDGE
Procedure of site visit and evaluation.
Technique to produce layout drawing.
Calculation of Ohm’s Law.
Calculation of diversity factor.
Bill of quantity (BQ).
Types of calculation: Total connected load (TCL) and Maximum Demand (MD).
Diversity factor.
Various type of conductor: Copper and Aluminium.
Various type of cable, such as: XLPE/SCT/PVC, PVC/PVC, PVC/SWA/PVC and XLPE/SWA/PVC.
Various types of protection devices: MCB, MCCB, RCCB/ELCB and Fuse.
Types of single phase wiring: Surface wiring, Conceal wiring, Conduit wiring, Conceal conduit Wiring, Ducting wiring, Trunking/Casing, Cable tray and Underground.
Earthing / grounding requirement.
Electrical Act & Regulation and Standard: Energy Commission Act 2001, Electricity Supply Act 1990 (Act 447), Electrical Regulation 1994, MS 1936: 2006 / IEC 60364, MS 1979: 2007 (COP) Electrical Installation of Buildings – Code of practice (COP) and Based on latest instruction by regulatory body.
Occupational Safety & Health Act 514 (OSHA) 1994.
Authorisation requirement to access site such as: Green card and Safety passport
RELATED SKILLS
Determine procedure to carry out site visit and evaluation.
Visit and evaluate site location.
Sketch layout plan.
Calculate Ohm’s Law
Calculate total connected load.
Calculate maximum demand.
Determine types of single phase wiring.
Determine types of protection devices.
Determine types of conductor.
Determine types of cable.
Determine Authorisation requirement to access site.
ATTITUDE / SAFETY / ENVIRONMENTAL
Attitude
Meticulous in calculating Ohm’s Law, TCL & MD. Adhere to safety regulation.
|
ASSESSMENT CRITERIA
Sketch layout plan according to requirement.
Calculate Ohm’s Law, MD & TCL correctly according to Electrical Act & Regulation and Standard.
List out the selection of protection devices, and cable listed out according to Electrical Act & Regulation and Standard.
|
CONTENT AND LEARNING STANDARDS
PROGRAMME | : | ELECTRICAL TECHNOLOGY |
COURSE NAME | : | SINGLE PHASE DRAWING |
CODE NAME | : | ETE 1013 |
CONTACT HOURS (TRAINING DURATION) |
CONTENT STANDARD (WORK ACTIVITIES)
|
LEARNING STANDARD (RELATED KNOWLEDGE / APPLIED SKILLS / ATTITUDE / SAFETY / ENVIRONMENTAL)
|
PERFORMANCE CRITERIA / ASSESSMENT CRITERIA
|
35 HOURS (7 WEEKS)
THEORY : 14 HOURS PRACTICAL : 21 HOURS
|
CARRY OUT LAYOUT DRAWING
|
RELATED KNOWLEDGE
Drawing set.
Computer Added Drawing software.
Computer operation.
Measurement scale technique.
Building layout symbol.
Application of configuration.
Electrical symbol, circuit and measurements for layout drawing.
Electrical accessories and fittings.
Procedure to draw layout drawing.
Format of layout drawing.
RELATED SKILLS
Acquire drawing set. Utilise Computer Added Drawing. Utilise computer system. Utilise drawing software. Interpret building layout plan. Determine electrical symbol. Determine electrical accessories/fittings. Sketch building layout. Determine single phase wiring configuration. Determine types of accessories and fittings to be used. Draw building layout (indoor / outdoor).
ATTITUDE / SAFETY / ENVIRONMENTAL
Attitude
Handle computer with care.
|
ASSESSMENT CRITERIA
Sketch building layout according to specification.
Determine the single phase wiring configuration according to specification.
Determine the types of accessories and fittings accoding to requirement and specification.
Carry out layout drawing drew according to requirement and specification. Check layout drawing format according to standard format.
|
CONTENT AND LEARNING STANDARDS
PROGRAMME | : | ELECTRICAL TECHNOLOGY |
COURSE NAME | : | SINGLE PHASE DRAWING |
CODE NAME | : | ETE 1013 |
CONTACT HOURS (TRAINING DURATION) |
CONTENT STANDARD (WORK ACTIVITIES)
|
LEARNING STANDARD (RELATED KNOWLEDGE / APPLIED SKILLS / ATTITUDE / SAFETY / ENVIRONMENTAL)
|
PERFORMANCE CRITERIA / ASSESSMENT CRITERIA
|
25 HOURS (5 WEEKS)
THEORY : 10 HOURS PRACTICAL : 15 HOURS
|
CARRY OUT SINGLE LINE / SCHEMATIC DIAGRAM DRAWING
|
RELATED KNOWLEDGE
Single line/schematic diagram drawing requirements and specifications as per rules and regulation.
Devices and cable specification: Switches, Protection, Cable and Socket outlet (Switch / Unswitch).
Circuit connection method.
Types of single phase wiring: Indoor single phase wiring and Outdoor single phase wiring.
Electrical symbol circuit.
Procedure to draw single line drawing.
Format of single line drawing
RELATED SKILLS
Determine electrical symbol.
Determine electrical accessories and fittings.
Read and interpret blue print.
Determine types of single phase wiring protection.
Determine types of accessories and fittings.
Compare single line drawing to layout drawing.
Draw electrical single line drawing.
ATTITUDE / SAFETY / ENVIRONMENTAL
Attitude
Handle computer with care. Adhere to ergonomic requirements.
|
ASSESSMENT CRITERIA
Determine single line drawing requirements and specification according to standard format.
Determine the devices and cable specification according to Electrical Act & Regulation and Standard.
Determine electrical symbol circuit according to requirement and specification.
Draw single line drawing drew according to requirement and specification.
Check single line drawing format according to standard format.
|
CONTENT AND LEARNING STANDARDS
PROGRAMME | : | ELECTRICAL TECHNOLOGY |
COURSE NAME | : | SINGLE PHASE DRAWING |
CODE NAME | : | ETE 1013 |
CONTACT HOURS (TRAINING DURATION) |
CONTENT STANDARD (WORK ACTIVITIES)
|
LEARNING STANDARD (RELATED KNOWLEDGE / APPLIED SKILLS / ATTITUDE / SAFETY / ENVIRONMENTAL)
|
PERFORMANCE CRITERIA / ASSESSMENT CRITERIA
|
15 HOURS (3 WEEKS)
THEORY : 6 HOURS PRACTICAL : 9 HOURS
|
CARRY OUT SINGLE PHASE WIRING DRAWING
|
RELATED KNOWLEDGE
Type of accessories.
Single phase wiring connection, terms and specification.
Single phase wiring protection.
Earthing system layout.
Cable size chart.
Single phase wiring specification and regulation.
Procedure to draw single phase wiring drawing.
Format of single phase wiring drawing
RELATED SKILLS
Read and interpret blue print.
Determine types of electrical connection.
Differentiate type of loads.
Determine types of connection.
Determine type of single phase wiring/ accessories and fittings.
Draw single phase wiring drawing.
ATTITUDE / SAFETY / ENVIRONMENTAL
Attitude
Meticulous in drawing.
|
ASSESSMENT CRITERIA
Determine Single phase wiring configuration according to requirement and specification.
Determine the types of accessories and fittings according to requirement and specification.
Draw single phase single phase wiring drawing according to requirement and specification.
Check single phase single phase wiring drawing format according to standard format.
|
CONTENT AND LEARNING STANDARDS
PROGRAMME | : | ELECTRICAL TECHNOLOGY |
COURSE NAME | : | SINGLE PHASE DRAWING |
CODE NAME | : | ETE 1013 |
CONTACT HOURS (TRAINING DURATION) |
CONTENT STANDARD (WORK ACTIVITIES)
|
LEARNING STANDARD (RELATED KNOWLEDGE / APPLIED SKILLS / ATTITUDE / SAFETY / ENVIRONMENTAL)
|
PERFORMANCE CRITERIA / ASSESSMENT CRITERIA
|
5 HOURS (1 WEEKS)
THEORY : 2 HOURS PRACTICAL : 3 HOURS
|
INSPECT SINGLE PHASE DRAWING
|
RELATED KNOWLEDGE
Types of drawing.
Procedure to check drawing error.
Drawing specification.
Procedure to check Ohm’s Law, Total Connected Load (TCL) and Maximum Demand (MD) from drawing.
Tender/clients requirements.
Procedure to submit single phase wiring drawing for approval.
RELATED SKILLS
Determine types of drawing.
Check drawing error.
Check drawing specification against design requirements.
Calculate Ohm’s Law, TCL & MD.
Print out single phase drawing.
Determine tender / clients requirements.
Submit single phase wiring drawing for approval to superior.
Carry out housekeeping activities.
ATTITUDE / SAFETY / ENVIRONMENTAL
Attitude
Meticulous in calculation.
|
ASSESSMENT CRITERIA
Check the drawing error correctly according to specification.
Check drawing specification according to format.
Calculate Ohm’s Law, TCL & MD according to Electrical Act & Regulation and Standard.
|
CORE ABILITY
CORE ABILITY |
SILA RUJUK LAMPIRAN A : JADUAL PEMETAAN NOSS DAN KSKV
SILA RUJUK LAMPIRAN B : JADUAL PEMETAAN NOSS DAN CORE ABILITY
|
TOOLS, EQUIPMENT AND MATERIALS (TEM)
ITEMS | RATIO (TEM : TRAINEES) |
Schematic diagram Block Diagram Measuring Instruments Electrical components/Parts Specification Equipment Data Book Drawing instrument Computer Computer Added Drawing software
|
1 : 1 1 : 1 1 : 1 1 : 1 1 : 2 1 : 1 1 : 1 1 : 5 |
REFERENCES |
Undang-Undang Malaysia. 2005. Akta Bekalan Elektrik 1990 dan Peraturan-Peraturan Elektrik 1994, Pindaan sehingga 2005. MDC Publisher Sdn Bhd Malaysia.
Suruhanjaya Tenaga Malaysia. Standard Pendawaian Malaysia (Electrical Installations Of Buildings - MS IEC 60364) Jabatan Standard Malaysia
The Institution of Electrical Engineers, 1998, Peraturan-Peraturan bagi Pemasangan Elektrik, Edisi 16. Golden Books Centre Sdn Bhd
Giesecke, F. E. et. Al. 2002. Technical Drawing. Prentice Hall
BS 7671: 2001 Requirements for Electrical Installations (IEE Wiring Regulations, Sixteenth Edition) Institution of Electrical Engineers
|
ETE 1013 |
| Document Page | 15/15
|
download buku rujukan..
ReplyDelete